Hot Bar Soldering Machine Thermode Hot Bar Welding Machine For SMT Line

特点：

Characteristic:

1、因应不同产品，升温速度可供调选

1. The heating rate can be adjusted according to different products.

2、特种材料焊接头，确保产品受压平均

2. Welding Joints of Special Materials to Ensure Average Pressure of Products

3、备有真空功能，调节对位更容易

3. Equipped with vacuum function, it is easier to adjust alignment.

4、温度数控化，清楚精密

4. Temperature numerical control, clear and precise

5、备有数字式压力计,可预设压力范围

5. A digital manometer is available to provide presumptive pressure range.

6、微电脑控制,精确稳定

6. Microcomputer Control, Accurate and Stable

7、可编程曲线包括预热及回流焊温度

7. Programmable Curves Including Preheating and Reflow Temperature

8、适用于各种高密度TAB、TCP压接及FPC、FFC与PCB焊锡压接

8. Suitable for all kinds of high density TAB, TCP and FPC, FFC and PCB solder bonding

9、左边焊接右边放治具,不浪费焊接等待时间,工作效率极高.

9. The left welding and the right welding fixtures will not waste the waiting time for welding, and the work efficiency is very high.

10、一人作业,采用多治具焊接,速度快。

10. One-man operation, multi-tool welding, fast speed.

☆FPC与PCB、连接器之间的焊锡连接

Soldering Tin Connection Between FPC, PCB and Connector

☆ACF与PCB、连接器之间的连接

Connection between ACF, PCB and connector

☆TAB与PCB、连接器之间的连接

Connection between TAB, PCB and connector

☆TFT与PCB、连接器之间的连接

Connection of TFT with PCB and Connector

☆FFC（柔性扁平电缆）与PCB、连接器之间的焊锡连接

Soldering Tin Connection between FFC (Flexible Flat Cable) and PCB and Connector

☆斑马纸与PCB、连接器之间的焊锡连接

Soldering Tin Connection between Zebra Paper, PCB and Connector

☆极细同轴线与PCB、连接器之间的焊锡连接

Soldering Tin Connection Between Extremely Fine Coaxial Line and PCB and Connector

☆硬盘、电阻器、电容、线圈、变压器、IC卡等漆包线的焊锡连接

Soldering Tin Connection of Enamelled Wire such as Hard Disk, Resistor, Capacitance, Coil, Transformer, IC Card

☆电池极片与PCB、连接器之间的焊锡连接

Soldering Tin Connection between Battery Plate, PCB and Connector

☆小型马达的卷线端子的焊锡连接

Soldering Tin Connection of Rolling Terminal of Small Motor

☆继电器、打印机、眼镜等的树脂热压接合

Resin Hot Pressing Joints for Relays, Printers, Glasses, etc.

机器规格：

Machine specifications:

1)最大工作面积 200×260mm

1) Maximum working area 200 x 260 mm

2)机器尺寸 1620×570mm×1390

2) Machine size 1620 *570 mm *1390

3)工作气压 0.45-0.70Mpa

3) Working Pressure 0.45-0.70 Mpa

4)定位夹具 多套

4) Multiple sets of positioning fixtures

5)机器重量 165kg

5) Machine weight 165 kg