1.Adopt high quality stainless steel chain for conveying;
2.Adopts the new type cleaning chain device for thoroughly cleaning;
3.Exhaust device adopts large air volume, high air pressure, low noise fan,upper and lower exhaust filter structure, two-stage filter;
4.It can effectively prevent the flux dropping on the surface of PCB and keep it clean;
5.The imported nozzle with small diameter is adopted to adjust the spraying conveniently,which will display the air pressure parameters in numerical value that is convenient for management and operation;
6.Flux supplying with constant pressure, and equips with flux auto adding device;
7.Man-machine interface operation, PLC control;
8.PC+ motion controller control, realize X, Y axis linkage;( for selective spraying option).
9.Stainless steel filter + backflow mechanism is used above the spray, and the lower layer is equipped with air pumping mechanism on both sides of the box, which improves the flux recovery rate;
Remarks:The computer and monitor will be configured for the selective sprayer.
Specifications:
Item
|
YSL-350S
|
YSL-350S(selective spray function)
|
Conveyer Motor
|
220V 60W
|
Conveyor Speed
|
0.5-1.8min
|
PCB Size
|
50-350mm
|
Inlet height
|
750±20mm
|
Spray drive motor
|
Step Motor 48V
|
Finger Cleaning Pump
|
220V 10W
|
Exhaust fan
|
3∮380V 50Hz 750W
|
Air pressure of Spray Fluxer
|
3-6bar
|
Dimension
|
1450(L)*1100(W)*1350(H)mm
|
Total Power Consumption
|
Approx. 1.3KW
|
Normal running power
|
1.0KW
|
Power
|
3∮380V 50Hz/60Hz
|
Net Weight
|
Approx.350kg
|
Control Type
|
PLC Touch screen+PLC
|
PC+ motion controller
|