印刷电路板自动清洗机

吸嘴清洗机 Auto Nozzle Cleaning Machine
Model：YS-12

机器简介 Machine Description:
YS-12吸嘴清洗机，采用多喷头喷射清洗方式，使用流体力学将水碎化，产生极细小的水雾，以音速形成强大的动能喷到吸嘴上，在待清洗的吸嘴上方形成一个持续的能量场，粉碎吸嘴表面和内部的污垢。机器不需要任何溶剂，使用工业纯净水即可清洗。
清洗：机器全自动清洗，每次可清洗12个吸嘴，不同型号的吸嘴配备不同的治具托盘，任何型号贴片机吸嘴都可以清洗，清洗以后在用压缩空气干燥。
检测：将治具托盘拿出，放到专门的吸嘴检查装置上检查，可观察到吸嘴清洗后的真实洁净状况。
By using latest special mechanism design,YS-12 use the hydrodynamic water fragmentation，producing very fine water mist，with the speed of sound (360m /s) to form a strong momentum jet to the nozzle and form a continuous energy field on the top of nozzle，crushing the  dirt on the surface or internal of Nozzle ，during the cleaning process the cleaning liquid ( DI water) can be achieved automatic direct emissions, not need cleaning solvent at all.
Clean: 12 nozzles at one time. it can clean all types of nozzles by using different nozzle trays. Compressed air blow to make nozzles dray.
Check: Standard equipped nozzle inspector.

机器特点 Machine Feature:
一次清洗12支吸嘴，清洗时间短，效率高。
Clean 12 nozzles in one time, quicker and more efficient
代替传统人工清洗，解决超声波清洗难题，减少贴片抛料现象发生。
Replace traditional manual clean, avoid troubles caused by ultrasonic cleaner, reduce rejection rate.
彻底解决超声波无法清洗的污垢杂质。
To clean the dirt completely which ultrasonic cleaner can not deal with.
不会因越来越小的吸嘴孔径而清洗不干净。
cleaning result will not affect by the smaller and smaller nozzle.
清洗更彻底,直接延长吸嘴寿命，清洗率99%以上。
Thoroughly clean 99% dirt on nozzle, extend the lifespan of nozzle.
保护吸嘴表面涂层、反光板。
Protect the coating surface of nozzle and its reflection panel.
绝不使用清洗剂，只需要环保的纯净水或去离子水清洗。
No solvent, only use environmentally friendly DI water or purified water .
操作简单方便。
Easy operation.
适用于各种贴片机吸嘴,针对十字型、工字型、异型吸嘴效果更明显。
Applicable to all kinds of Mounter nozzles.

机器规格 Machine Spec: