Aluminum Substrate Substrate Substrate YSVC-3S (LED Lamp Aluminum Substrate Substrate Substrate)

产品特点：

Product characteristics:

1.采用独特的切割方式，电路板由六个刀片切割而成。它是由一个上刀片和一个下刀片组成的组，并且也是切割单元。

1. Using a unique cutting method, the circuit board is cut by six blades. It consists of an upper blade and a lower blade, and is also a cutting unit.

2.有A，B，C三组。整个切割过程分为三个阶段，从A组刀片切割40％板到B组刀片切割通过A组切槽完成另外40％。最后20％切割C组刀片和精加工。因为每个切割体积很小，切割过程中产生的应力与传统切割相比下降了80％以上。

2. There are three groups A, B and C. The whole cutting process is divided into three stages, from group A blade cutting 40% plate to group B blade cutting through group A slotting to complete another 40%. The final 20% cutting C group blades and finishing. Because each cutting volume is very small, the stress generated in the cutting process is reduced by more than 80% compared with the traditional cutting.

因此，板的边缘及其表面非常光滑而没有翘曲。目前，它是唯一能够保证铝板切割后不变形的机器。

Therefore, the edge and surface of the plate are very smooth without warping. At present, it is the only machine that can guarantee the deformability of aluminium sheet after cutting.

3.因为刀片的切削力很小。 abd采用瑞典进口的高速钢材料制成。刀片的耐久性大大提高，切割铝板时的寿命可以是一年或更长。

3. Because the cutting force of the blade is very small. Abd is made of high-speed steel imported from Sweden. The durability of the blade is greatly improved, and the service life of cutting aluminium sheet can be one year or longer.

4.由于多次切割，切割过程非常顺畅，大大提高了V-CUT槽的位置能力。

4. Because of many times of cutting, the cutting process is very smooth, which greatly improves the position ability of V-CUT slot.

即使有浅槽V-CUT凹槽，板也不会从刀片中跳出来，避免不利。

Even if there are shallow V-CUT grooves, the plate will not jump out of the blade to avoid disadvantage.

5.所有切割刀片均采用励磁双频激光干涉测量仪进行校准。确保后刀可以准确地继续切入已经用前刀切割的槽中。刀尖的抖动小于0.02mm。确保完美的切割质量。

5. All cutting blades are calibrated by excitation dual-frequency laser interferometer. Ensure that the reamer can accurately continue to cut into the slot that has been cut with the rake. The jitter of the tool tip is less than 0.02mm. Ensure perfect cutting quality.

YSVC-3S规格

YSVC-3S Specification

1.型号为YSVC-3S，带2.4M平台

1. Model YSVC-3S with 2.4M platform

2.尺寸880 * 420 *320毫米（L * W * H）

2. Size 880 * 420 * 320 mm (L * W * H)

3.机重52kg

3. machine weight 52kg

4.V型槽的最小部件距离为1mm

4. Minimum component distance of V-groove is 1 mm

5.最大组件高度20毫米

5. Maximum assembly height 20 mm

6.电压220 V / 50HZ或110V

6. Voltage 220 V/50 HZ or 110 V

7.合适的PCB长度不限

7. Suitable PCB length is unlimited

8.切割厚度0.6-5.0mm

8. Cutting thickness 0.6-5.0 mm

9.切割速度300~500mm / s。

9. Cutting speed is 300-500 mm/s.